Cleanup - MK Diamond Products MK-370 Owner's Manual

MK-370 SAW

CLEANUP

NOTE: Dispose of wastewater in accordance with applicable Federal, State and Local laws.
(A)
Ensure the ON/OFF Switch is
in the OFF position. Remove
the Cutting Assembly from the
Water Pan
CAUTION
(D)
Fill the Water Pan with
clean water
CAUTION
(G)
Clean the Guide Bar
Dispose of the contents of
the Water Pan and clean
the pan. Replace the
Ensure the saw is disconnected before completing the remainder of the
cleanup process.
Run the MK-370 until clear
water is seen at the blade
cooling ports (Approx. 1
To extend the life of the MK370, lubricate the Motor Shaft with light oils such
as, 3 in 1, WD-40, etc.
Clean the Roller Wheel
(B)
Cutting Assembly.
(E)
minute)
(H)
Guide Rail
20
MAINTENANCE
(C)
Clean the Water Pump of all
debris. (Refer to water pump
manual for more detail)
(F)
Dispose of the contents of the
Water Pan and clean the MK-
370 with soap and clear water
(I)
Clean the Roller Wheels