MK-370 SAW
ADJUSTMENT & OPERATION
CAUTION
(A)
Loosen the retaining thumbscrew
and place the Atdjustable Cutting
Guide to the desired cut length
and tighten thumbscrew
(D)
Perform the cut. Turn the motor
OFF when work is complete
DO NOT FORCE THE TOOL. It will do the job better and safer at the rate for
which it was designed.
Place the tile against the
Ruler/Stop and Cutting
(B)
proper cooling flow on both sides
Guide
Section to increase/decrease flow)
19
OPERATION
(C)
Turn the motor ON and verify
of the blade (See Maintenance