Troubleshooting - MK Diamond Products MK-370 Owner's Manual

MK-370 SAW

TROUBLESHOOTING

Blade will not cut properly.
(A)
Check for Smoothness or
"Glazing" (Dress blade if needed)
(D)
Verify the blade is correct for the
material being used
COOLING FLOW
(A)
Check that the Cooling Flow
Adjusting Valve is FULL open
(B)
Check for proper rotation
(B)
Remove the Cooling Transfer
Tube from the Blade Guard
inlet and clean
24
TROUBLESHOOTING
(C)
Ensure the Blade Core is not
bent and Arbor is not out of round
(C)
Check the cooling flow Adjusting
Clamp is open