Motor Brush Change-Out - MK Diamond Products MK-370 Owner's Manual

MK-370 SAW

MOTOR BRUSH CHANGE-OUT

WARNING
(A)
Locate and loosen one Motor
Brush Housing Cover using a Flat
Head Screwdriver
(D)
Clean the Motor Brush Housing
using a Q-tip
(G)
Install the second Motor Brush
(Repeat Steps C to F)
Disconnect the tool before servicing and when changing accessories, such as
blades and bits.
Remove the Motor Brush
Align and install the new Motor
(B)
Housing Cover
(E)
Brush
23
MAINTENANCE
(C)
Remove the old Motor Brush
(F)
Install Motor Brush Cap and
tighten using a screwdriver