Water Pump Preparation - MK Diamond Products MK-370 Owner's Manual

MK-370 SAW ASSEMBLY
(D) (E)
Inspect the MK-370 for Verify the Movable Cutting
damage – ensure the cord is Table moves freely
free of cracks or cuts

WATER PUMP PREPARATION

(B) (C)
(A)
Connect the Cooling Transfer Place the Water Pump in the
Press the end of the cooling
Tube to the inlet connection Water Pan with the suction down
Transfer Tube onto the Water
of the Blade Guard and insert the Pump Cord to the
Pump
clip in the back.
(D) (E)
Fill the water Pan with Connect the Water Pump
clean water covering Pump power cord to the connection
suction (this should be done found on the back of the motor
periodically during cutting)
17