Installation Requirements; Tools And Parts; Tools Needed; Parts Supplied - Kenmore 66513292K115 Installation Instructions Manual

INSTALLATION REQUIREMENTS
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with any
tools listed here.
All Installations
Tools needed:
Pliers
Phillips
screwdriver
5A6" and 1/4"
nut drivers or _Sr _
hex sockets
Measuring tape
_
or ruler
10" adjustable wrench
tha! opens to _//-_
11/8 (2.9 cm)
Torx ®*T20 _ screwdriver
Flat-blade
screwdriver
Utility knife
UL Listed/CSA
Approved twist-on
_ _
wire connectors*
Small level
%" open-end
wrench
*Must be the proper size to connect your household wiring
to 16-gauge wiring in dishwasher.
Other useful items you may need:
[Flashlight_ Shallow _ Bath _-_i
Parts supplied:
Drain hose Iuram
clamps (2) i nose
(1 large and
1 small)
I
#10XwI 2- under-
Phillips.head counter
screws (2)mounting
brackets
Make sure all these parts are included in the literature package.
1-®TORX and T20 are registered trademarks of Saturn Fasteners, Inc.
Parts needed:
3 _l 3 _J
Y8 Comprx Y4 hose
fitting: ContaCt your !ocal
sears store t0 purchase
Kit Number 1100g.
Other parts you may also need:
[il/2" "
--2 _ I Masking Orl
(3.81w5 cm) I duct tape
sc e :type I
ClamPS (3 maximum)1
NOTE: Parts available for purchase in plumbing supply stores.
Check local codes. Check existing electrical supply. See
"Electrical Requirements" section. It is recommended that
electrical connections be made by a licensed electrical installer.
In addition, for first-time installations
Tools needed:
Cordless drill
With 1/2,3/4
1 and 1V2 hol_
saw bits
Parts needed:
Copper tubing (%'! see "Electrical Requirements" section:
O.D.suggested) or I
flexible [)raided For Direct Wire: For PoWer Supp!y
Water supPly line use UL L!sted/ cord: use UL
CSA Approved Listed/CSA
I strain APPr°ved power
(,[._._k._._ _)_))_') I tofit% (2.2cm) supply cordkit
"_-_'__/ I hole marked for use With
I 'dishWasher