Remove Terminal Box Cover; Install Strain Relief; Remove Panel And Fasteners; Remove Panels - Kenmore 66513292K115 Installation Instructions Manual

Helpful Tip: Place cardboard under dishwasher until installed in
cabinet opening to avoid damaging floor covering. Do not use
door panel as a worktable without first covering with a towel to
avoid scratching the door panel.
Using two or more people, grasp sides of dishwasher door
frame and place dishwasher on its back.
Option & Remove Access Panel - Plastic Panel
Using a flat-blade screwdriver, turn the plastic fasteners 1/4turn
counterclockwise to unlock them. Remove panel. Do not remove
tech sheet from access panel.
Option B, Remove Access Panel - Metal Panel
Using a 1/4" hex head socket, nut driver or Phillips screwdriver,
remove 2 screws attaching access panel and lower panel to
dishwasher. Do not remove tech sheet from access panel.
Using a 1/4" hex head socket, nut driver or Torx ® T20 ®
screwdriver, remove terminal box cover. Retain for later use.
Install a UL Listed/CSA Approved strain relief. Make sure screw
heads are facing to the left when tightening conduit nut. Strain
relief is provided with the power supply cord kit.
connection will you use?
NOTE= If using Option B, proceed to "Determine Cabinet
Opening," to continue with the installation of your dishwasher.
12