Make Power Supply Cord Connection; Route Cord Into Terminal Box; Connect Remaining Wires - Kenmore 66513292K115 Installation Instructions Manual

Option A_ Power Supply Cord.
Route cord so that it does not touch dishwasher motor to lower
part of dishwasher tub. Pull cord through strain relief in terminal
box. Take notice when installing or removing the dishwasher in
order to reduce the chance of damaging the power supply cord.
Select UL Listed/CSA Approved twist-on wire connectors
(included with power supply cord kit) rated to connect your
power supply cord to 16-gauge dishwasher wiring.
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
U t-S _ :
ii!iill iiiiii III!I _I !iiiii i i
[ x---J I/'/'/'_)_,_y wire r _ruu,_u
)
Remove the green grounding screw and place through the ring
terminal of the green ground wire. Reattach and tighten the
green screw.
NOTE: Twist on wire connector. Gently tug on wires to be sure
both are secured.
13