Table of Contents
Advertisement
Built-up floors. If the kitchen floor is higher than the cabinet
opening's floor - for example, the kitchen floor tile does not
extend into the cabinet opening - add shims as needed in the
area shown to bring the dishwasher up to 34" (86.4 cm) below
the countertop.
NOTE: Shims must be securely attached
to floor to avoid
movement when the dishwasher is in use.
For custom panel installation,
refer to the Custom Panel
Installation
Insert Sheet (Part Number W10438319A).
Complete
custom panel installation
before proceeding
to the "Choose
Attachment
Option"
section.
.............
O ;yo
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
Using 2 or more people, stand the dishwasher up.
IMPORTANT: The dishwasher must be secured to the cabinet.
There are two brackets found in the parts bag. Attach the
brackets using Option A if the countertop is wood, laminate or
another similar surface. If your countertop
is marble, granite or
another hard surface, install using Option B.
Option A, Countertop Attachment
Insert
bracket
Tabs must point
Remove the brackets from the package
and insert into the open
slots on the left and right-hand
top of the dishwasher collar as
shown.
Using a pair of pliers, bend the tab down to secure the bracket
in place. Repeat this step for the other side.
NOTE: Do not attach the dishwasher. This will be done later.
15
Hide quick links:
Advertisement
Table of Contents
