Connect To Water Supply; Adjust Rear Leveling Legs - Kenmore 66513292K115 Installation Instructions Manual

Stainless steel tub undercounter dishwasher
Table of Contents


Align front of dishwasher door panel with front of cabinet doors.
You may need to adjust alignment to be even with your
Check that leveling legs are firmly against the floor. Close and
latch the door, and place level against the front panel. Check
that dishwasher is centered from front to back in the opening. If
needed, adjust leveling leg until dishwasher is plumb. Repeat for
other side of dishwasher.
Helpful Tip: Push up on front of dishwasher to raise dishwasher
off the ground to adjust front legs. With some installations, it
may be easier to adjust the front leg using the sA6" hex head
socket or adjustable
To raise the rear of the dishwasher, adjust the rear leveling leg
using a Phillips screwdriver. Turn clockwise until the dishwasher is
level front to rear.
Place level against top front opening of tub. Check that
dishwasher is level from side-to-side.
If dishwasher is not level,
adjust front legs up or down until dishwasher is level. Close the
dishwasher door.
Copper tubing only: Slide nut, then ferrule, about 1" (2.5 cm)
onto copper tubing.

Hide quick links:


Table of Contents

Table of Contents