Security Command Executive XR200 User Manual page 29

Relay Output Schedules
The Schedules function allows you to set up to 50 different scheduled
times for relays connected to your system to turn on and off
automatically.
Programming Output Schedules:
1. Access the User Menu.
2. Press COMMAND until SCHEDULES? displays.
3. Press any SELECT key. The keypad displays PRI TMP OUT
or (PRI SEC OUT). Press the SELECT key under OUT.
4. At the OUTPUT NO: – display, enter the relay output number
you want to program. Press the COMMAND key.
If adding a schedule and all 50 are currently in use, you'll see an OUT
SCHEDS FULL on the display. You must then delete or change an
existing schedule.
5. The keypad displays SUN MON TUE WED. Press the
COMMAND key to display THU FRI SAT.
6. Press the SELECT key under the day you want to program.
Note: After selecting the day of the week for the schedule to occur,
the keypad displays any currently programmed On Off times
previously set for that day. This feature allows you to review
programmed schedules at any time.
Relay Output Schedules
The Schedules function allows you to set up to 50 different scheduled
times for relays connected to your system to turn on and off
automatically.
Programming Output Schedules:
1. Access the User Menu.
2. Press COMMAND until SCHEDULES? displays.
3. Press any SELECT key. The keypad displays PRI TMP OUT
or (PRI SEC OUT). Press the SELECT key under OUT.
4. At the OUTPUT NO: – display, enter the relay output number
you want to program. Press the COMMAND key.
If adding a schedule and all 50 are currently in use, you'll see an OUT
SCHEDS FULL on the display. You must then delete or change an
existing schedule.
5. The keypad displays SUN MON TUE WED. Press the
COMMAND key to display THU FRI SAT.
6. Press the SELECT key under the day you want to program.
Note: After selecting the day of the week for the schedule to occur,
the keypad displays any currently programmed On Off times
previously set for that day. This feature allows you to review
programmed schedules at any time.
7. If On Off times are displayed, the keypad then displays DELETE
KEEP. Press the SELECT key under DELETE to enter new
times.
8. The keypad then displays ON TIME?. This is followed by the
display – : AM PM.
Enter a new relay On time and select AM or PM.
The display changes to OFF TIME?. This is followed by the
display – : AM PM.
Enter a new Off time for the relay.
Enter all schedule times using a 12 hour clock. For example, to
enter 6 AM you would enter a 0 + 6 + 0 + 0 and press the
SELECT key under AM. For 11 PM you would enter a 1 + 1 +
0 + 0 and press the SELECT key under PM.
9. The keypad then goes back to the day of the week displays
allowing you to enter another Output schedule. To exit the user
menu or to go back to the PRI TMP OUT display, press the
ARROW key.
10. To clear a schedule, press DELETE and then AM when the
opening time is requested.
List your Opening and Closing schedules in the table provided on the
following page for easy reference.
7. If On Off times are displayed, the keypad then displays DELETE
KEEP. Press the SELECT key under DELETE to enter new
times.
8. The keypad then displays ON TIME?. This is followed by the
display – : AM PM.
Enter a new relay On time and select AM or PM.
The display changes to OFF TIME?. This is followed by the
display – : AM PM.
Enter a new Off time for the relay.
Enter all schedule times using a 12 hour clock. For example, to
enter 6 AM you would enter a 0 + 6 + 0 + 0 and press the
SELECT key under AM. For 11 PM you would enter a 1 + 1 +
0 + 0 and press the SELECT key under PM.
9. The keypad then goes back to the day of the week displays
allowing you to enter another Output schedule. To exit the user
menu or to go back to the PRI TMP OUT display, press the
ARROW key.
10. To clear a schedule, press DELETE and then AM when the
opening time is requested.
List your Opening and Closing schedules in the table provided on the
following page for easy reference.
25
User Menu
User Menu 25