Vertical Or Horizontal Pipe Mounting; Panel Mounting; Sun-Shield; Wiring Safety Information - Hach sc1000 User Manual

Installation

3.2.2 Vertical or horizontal pipe mounting

1 Bracket, pipe mount (LZY001)
2 Rubber pads (8x) (LZX948)

3.2.3 Panel Mounting

3.2.4 Sun-shield

3.3

Wiring safety information

14
Refer to Figure 4 for mounting descriptions. For more information on pipe mounting refer
to the instructions supplied with the mounting kit.
Figure 4 Pipe mounting hardware
Refer to the instruction sheet supplied with the mounting hardware for installation
instructions.
The optional sun-shield is highly recommended for all outdoor installations. Refer to the
instruction sheet supplied with the sun-shield for installation instructions.
DANGER
Electrocution hazard. Always disconnect power to the instrument when making
electrical connections.
When making any wiring connections to the sc1000 Controller, the following warnings
and notes must be adhered to, as well as any warnings and notes found throughout the
individual installation sections. For more safety information refer to
page 9.
Remove the display module before performing any wiring tasks
3 Flat washer (4x) (LZX948)
4 Hexagon head screw (4x) M5 x 30 mm (LZX948)
Safety information on
(Figure 5).