Hach sc1000 User Manual page 114

Advanced Operations
SYSTEM SETUP
NETWORK MODULES
FIELDBUS
TEST/MAINT
VERSION
LOCATION
1 Time (x-axis)
2 Period
3 Period
First floating point value
112
Default value: DISABLED
This menu works independently from the simulation.
DISABLED: Normal operation mode
ENABLED: Sets the TEST/MAINT bit (0x0040) of every status register of every configured slave
to indicate the "Service" mode.
Displays the current software version of the Modbus network adapter card.
Displays the current location.
Figure 66 Modbus simulation mode
Table 38 Color/line code for
4 Minimum
5 Maximum
6 Simulated value (y-axis)
Figure 66