Hach sc1000 User Manual page 71

To set computer settings (description for Windows XP):
1. Attach a modem to the computer and install the modem drivers.
2. In the Windows Start menu, select Programs, Accessories, Communications, New
Connection Wizard to add a new dial-up connection.
3. In the New Connection wizard dialog box select the options listed in
Table 19 New connection wizard—Settings
Dialog box
Location Information
Network Connection Type
Getting ready
Internet connection
Select a device
Connection name
Phone number to dial
Internet Account Information
4. In the Windows Start menu, select Programs, Accessories, Communications,
Network connections.
5. Right-click the new dial-up connection and select the Properties command.
6. Select the Networking tab.
7. Select the Internet Protocol (TCP/IP) option, click the Properties button.
Make sure that the Obtain an IP address automatically option is selected and
confirm.
8. Select the Internet Protocol (TCP/IP) check box only and remove all other check
marks.
To run the dial-up connection and start the web browser:
1. Switch to the measured value display on the sc1000 controller.
2. Start the prepared connection to dial-up the sc1000 GSM modem.
3. Start the web browser.
4. Enter the IP address of the sc1000 controller (by default: 192.168.154.30) in the web
browser address box.
5. The sc1000 log on screen is displayed. The password is set in the sc1000 controller
software under SYSTEM SETUP, BROWSER ACCESS, LOGIN PASSWORD.
6. The sc1000 controller can be administered remotely through browser access.
Standard Operations
Setting
Select the country
Select "Connect to the internet"
Select "Set up my connection manually"
Select "Connect using a dial-up modem"
Select the connected modem
Enter a connection name, for example "SC1000"
Enter the telephone number of the SIM card
Leave the user name and password field empty.
Remove the check marks on the check boxes.
Table 19:
69