Sms Service; Configure Sms Destination; Sms Format - Hach sc1000 User Manual

Hach controller user manual
Hide thumbs Also See for sc1000:
Table of Contents

Advertisement

Troubleshooting

8.4 SMS service

8.4.1 Configure SMS destination

8.4.2 SMS format

124
Provided the display module is equipped with a GSM modem and a SIM card, the sc1000
controller can send SMS to up to five destinations if an error or a warning in an attached
device occurs (refer to
section 8.3 on page
The following messages are sent via SMS:
Not confirmed messages which are stored in the message list.
New messages which are displayed in the message window.
Important Note: To stop sending SMS repeatedly, confirm the message window.
Confirming an error or a warning does not affect the origin of the error/warning. Qualified
service is still required.
The SMS destination settings determine where to send the SMS if an error/warning is
detected.
To enter the SMS destination, select MENU, SYSTEM SETUP, GSM MODULE, SMS
DESTINATION.
For more detailed SMS configuration information, refer to
The SMS message has a fixed character length. The single parts a separated by a blank.
The characters set for text parts is limited to the GSM 03.38 alphabet which is supported
by the GSM modem. Refer to
description.
Table 48
gives an example for an SMS.
Message type | Facility | Location | SIM Card Data | Serial number sc1000 | Probe name |
Probe location | Serial number probe | Text | Date | Time | Manufacturer ID | Instrument ID
Information
Description
W=Warning, E=Error, P=Process Events
Message type
For example: <E32>=Communication error
Addresser information
FACILITY
Refer to MENU, SYSTEM SETUP, DISPLAY SETTINGS, FACILITY
Addresser information.
LOCATION
Refer to SYSTEM SETUP, DISPLAY SETTINGS, LOCATION
Telephone number for remote access connections.
SIM Card Data
Refer to SYSTEM SETUP, GSM MODULE, SIM CARD DATA
Serial number
Serial number of sc1000 controller.
sc1000
Probe name
Name of probe who has caused this message.
Probe location
Location of probe who has caused this message.
Serial number
Serial number of probe who has caused this message.
probe
Text
Error, warning or event text.
Date
Date (Format: YYMMDD) of last occurrence.
Time
Time (Format: HHMM) of last occurrence.
122).
Table 46
and
Table 47
Table 46 SMS format
Table 47 SMS format description
section 3.10 on page
for SMS format and SMS format
45.

Advertisement

Table of Contents
loading

Table of Contents