Hach sc1000 User Manual page 38

Installation
1 Network termination activated, last device on network
2 Network termination deactivated, other devices on network
after this device.
Terminal
36
After installation and connection of a plug-in expansion card, the card must be configured
to the system. For Profibus card setup instructions refer to
Figure 26 Profibus DP card (YAB020) connections
Table 9 Profibus DP card (YAB020) terminal assignments
1
2
3
4
5
6
7
section 6.3.4.1 on page
3 Terminal Block – Refer to
assignments.
Designation
Not used
Not used
B in (wire color red)
A in (wire color green)
B out (wire color red)
A out (wire color green)
PE (Protective Earth)
109.
Table 9 for terminal