Gsm Module - Hach sc1000 User Manual

6.3.5 GSM module

SYSTEM SETUP
GSM MODULE
PROVIDER
SIGNAL STRENGTH
STATUS
INITIALIZATION
NO SIM CARD
WRONG PIN
SEARCHING
NETWORK
INCOMMING CALL
CONNECTION
READY
EXTERNAL DIAL-UP
ALLOWED
DENIED
EXTERNAL SERVICE
DIAL-UP
ALLOWED
DENIED
IP SERVER
IP CLIENT
SMS DESTINATION
NUMBER SERVICE
SMS DESTINATION 1-4
SMS DESTINATION
LANGUAGE
SMS LIMIT
–
(0 100)
REPEAT
–
(0 24 hours)
START TIME
The GSM Module menu contains all settings which are needed for remote communication
(dial-up) between the sc1000 controller and a computer.
For more detailed information refer to
Note: This menu is displayed only if a GSM modem is installed in the sc1000 controller
Displays the current mobile network.
Displays the radio signal strength (0%
Displays the current status of the GSM modem:
The display module initializes the GSM modem
Refer to section 3.10.3 on page 47
The configured PIN number is not correct.
The GSM modem tries to connect to the SIM card (mobile network).
The GSM modem detects an incoming call.
The GSM modem accepts the call and is online.
The GSM modem is ready for operation.
Remote access via GSM modem is allowed.
The GSM modem doesn't answer incoming calls. SMS shipping is always possible!
Dial-in for service technicians is allowed.
Dial-in for service technicians is not allowed. Login is possible with customer password only.
Refer to section 6.3.8 on page
Displays the IP address of the display module. To access the display module via your web
browser, enter this IP address into the web browser address field. The default IP address
192.168.154.30 is always valid for remote access.
Displays the IP address of the remote computer.
Contains the same functionality like SMS DESTINATION 1-4, but it is password protected with
the MAINTANENCE password.
SMS receptors telephone number.
Selects a language for SMS text.
Note: The character set for SMS text is limited to the GSM alphabet. Some languages contain
not supported characters. Not supported characters are replaced with a '?'.
Sets the maximum number of SMS messages the display module is allowed to send out within
24 hours for this SMS DESTINATION. The 24h cycle starts at the at the set START TIME.
Sets an interval for the repeat cycle.
The interval determines the frequency of sending not confirmed messages to the SMS
destination.
Sets the start time for the REPEAT cycle.
(Example: REPEAT=6 hours, START TIME=2:00: Not confirmed messages are sent at 2:00,
8:00, 14:00, 20:00).
section 3.10 on page
–
100%)
on how to insert a SIM card.
116.
Advanced Operations
45.
113