Using The Service Port; Using Datacom; Update The Display Language; Update The Date And Time - Hach Polymetron 9500 User Manual

3. To retrieve settings from the controller (or a device connected to it) and put the settings on the SD
card:
a. Select RETRIEVE SETTINGS and push enter.
b. Select the devices that contain the information to be transferred. All devices are selected by
default. To deselect an item, highlight the selection and push the left arrow key. Push enter to
begin the file transfers. Wait for the "TRANSFER COMPLETE" message.
c. If files already exist on the SD card, a confirmation window appears. Select the devices again
and push enter. Wait for the "TRANSFER COMPLETE" message.
d. Push enter to return to the MANAGE CONFIGURATION menu.
4. To copy settings from the SD card to a controller (or a device connected to it):
a. Select COPY SETTINGS and push enter.
b. Select the devices on the SD card. All devices are selected by default. To deselect an item,
highlight the selection and push the left arrow key. Push enter to begin the file transfers. Wait
for the "TRANSFER COMPLETE" message.
c. When the transfer is complete, push enter to restart the connected devices.
d. Push enter to restart the controller or push back to return to the MANAGE CONFIGURATION
menu.

Using the service port

The service port is used to download data files from the controller and install new versions of
controller and sensor firmware. To download data and update software, use the service port in
combination with DataCom and a service cable (LZX887).

Using DataCom

When using the service port, it is necessary to use DataCom. DataCom is a PC Application Utility
that downloads data log and event log files from the controller and installed sensors. Files are
downloaded from the controller through the controller service port or they can be placed on a Secure
Digital Memory (SD) card installed in the controller. In addition, DataCom is used to upload software
for the controller and sensors. The DataCom application must be installed on a PC to read the files.
Refer to the DataCom manual for more information on how to use the application. The DataCom
manual, software updates and other downloadable resources are available at
lange.com or http://www.hach.com.

Update the display language

1. Push the menu key and select Polymetron 9500 SETUP>LANGUAGE to display the list of
language options.
2. Highlight the language to be used for the controller and push enter.

Update the date and time

1. Push the menu key and select Polymetron 9500 SETUP>SET DATE/TIME.
2. Select DATE FORMAT and push enter.
3. Select a format and push enter.
4. Select DATE/TIME and push enter.
5. Update the entries.
a. Use the right and left arrow keys to highlight a field.
b. Use the up and down arrow keys to change the values in the field and push enter.
c. At the end of the date field, push the right arrow to wrap down to the time fields.
d. Use the up and down and arrow keys to update the time fields.
6. Push enter to save the changes.
http://www.hach-
English 41