Table of Contents
Advertisement
OPTICAL DISK DRIVE
You may replace the factory-installed optical disk drive with an optional DVD SuperMULTI drive.
IMPORTANT:
NEC.
Optical disk drive bay
Installation Procedure
Take the following steps to install the optical disk drive.
1.
See page 197 to prepare.
2.
Pull out the server from the rack (as described on page 197).
3.
Remove the drive cover (as described on page 216).
4.
Remove the cable while holding both ends of cable fixing bracket of the optical disk
drive.
5.
Remove the optical disk drive bracket by pulling the bracket in the direction of the arrow
while pulling up the pull button that fixes the drive in place.
Be sure to use the optical disk drive authorized by
Upgrading Your Server 9-81
Advertisement
Table of Contents
Troubleshooting
