Using Your Server; Installing Or Removing The Front Bezel - NEC N8100-1644F User Manual

2-16 General Description

USING YOUR SERVER

This section describes the basic operations of the server including how to use devices such as the
optical disk drive.

Installing or Removing the Front Bezel

When turning the power of the server on/off, accessing the optical disk drive and the backup file
device, or installing or removing a hard disk drive on or from a hard disk drive bay, first remove the
front bezel.
IMPORTANT:
The front bezel can be opened only when you unlock it by using the
attached security key.
Do not press the POWER switch when installing or removing the front
bezel.
1.
Insert the attached security key into the key slot and turn the key to the front bezel side
while pressing it lightly to release the lock.
2.
Hold the right end of the front bezel carefully to pull it toward you.
Unlock Lock