NEC N8100-1644F User Manual page 286

8-24 Troubleshooting
Messages displayed on bottom line (BMC messages)
On-screen message
Proc1 VccpAlm XX
Proc2 VccpAlm XX
Proc1PVtt Alm XX
Proc2PVtt Alm XX
Proc1 1.5v Alm XX
Proc2 1.5v Alm XX
BB 1.0vsb Alm XX
BB 1.1v Alm XX
BB 1.2vsb Alm XX
BB +1.5v Alm XX
BB +1.8v Alm XX
BB 1.8vsb Alm XX
BB +3.3v Alm XX
BB 3.3vsb Alm XX
BB +5.0v Alm XX
BB 5vsb Alm XX
BB +12v Alm XX
VBAT Alm XX
BB Temp1 Alm XX
FP Temp Alm XX
Proc1 Therm % XX
Proc2 Therm % XX
CPU1_DIMM1 Temp XX
CPU1_DIMM2 Temp XX
CPU1_DIMM3 Temp XX
CPU1_DIMM4 Temp XX
CPU1_DIMM5 Temp XX
CPU1_DIMM6 Temp XX
CPU2_DIMM1 Temp XX
CPU2_DIMM2 Temp XX
CPU2_DIMM3 Temp XX
CPU2_DIMM4 Temp XX
CPU2_DIMM5 Temp XX
CPU2_DIMM6 Temp XX
DUMP Request !
OS shutdown Alm
Power Unit 1 Alm
Power Unit 2 Alm
Proc Missing
Description
A voltage abnormality was
detected.
XX = 09: Upper limit abnormality
XX = 02: Lower limit abnormality
A voltage abnormality at the
warning level was detected:
XX = 07: Upper limit warning
XX = 00: Lower limit warning
A temperature abnormality was
detected.
XX = 09: High temperature
abnormality
XX = 02: Low temperature
abnormality
A temperature abnormality at the
warning level was detected:
XX = 07: High temperature
warning
XX = 00: Low temperature
warning
The dump button was pressed.
An OS stop error was detected.
A power supply unit 1 abnormality
occurred.
A power supply unit 2 abnormality
occurred.
No CPU is installed.
Action
Contact your service
representative.
It is possible that a fan has failed
or is clogged up. Contact your
service representative and
request repairs.
Wait until collecting the memory
dump data has finished.
Record the displayed message,
wait until collecting the memory
dump data has finished, and then
contact your service
representative and request
repairs.
Make sure that the power cord is
plugged in. If this does not
resolve the problem, contact your
service representative and
request repairs.
Contact your service
representative and request CPU
or motherboard replacement.