Bitlocker - NEC N8100-1644F User Manual

E-6 Installing Windows Server 2008
Example:
The partition size required for a system with an installed memory size of 1GB (1,024MB) and a full
installation of the operating system:
6,300MB + (1,024MB * 1.5) + 1,024MB + 300MB + application size
= 9,160MB + application size.
If the partition where the operating system is installed is smaller than that required to install the OS
and paging file, expand the partition size or utilize a larger disk. If your system does not have a
sufficient dump file size, divide the required file space into multiple disks by performing the steps
below:
1.
Set the partition size to a size sufficient to install the OS and paging file.
2.
See "Setting for Solving Problems" to write the debug information of the dump file onto
another disk.
If there is not enough disk space to write the debug information, add another disk for the dump file.

BitLocker

If you use BitLocker, note the following:
Before you install Windows Server 2008, create two partitions:
– System partition for a loader
– Boot partition for the operating system
NOTE:
Microsoft TechNet.
"Windows BitLocker Drive Encryption Step-by-Step Guide"
Be sure to keep the recovery password secure. Do not keep it around a server running
BitLocker.
IMPORTANT: Without the recovery password, you cannot start the
operating system and see the partition content encrypted by BitLocker.
The recovery password may be needed when you start the operating
system after performing the following tasks:
Replacing the motherboard
Initializing the TPM
Changing the BIOS setting
Windows Server 2008 is not installed in the partition encrypted by BitLocker.
For more information, see the following documentation in