NEC N8100-1644F User Manual page 330

9-8 Upgrading Your Server
3.5-inch Disk Model
Up to six hard disk drives can be installed in the hard disk drive bays. The order of the
port numbers is determined according to the included slots. For details, see the figure
below.
IMPORTANT:
hard disk drive might cause a failure of the server as well as the hard disk drive.
Purchase hard disk drives of the following models (current as of June 2010):
– N8150-209A (250GB, 7200rpm, SATA2/300)
– N8150-274 (500GB, 7200rpm, SATA2/300)
– N8150-263 (1TB, 7200rpm, SATA2/300)
– N8150-278 (2TB, 7200rpm, SATA2/300)
Use a hard disk drive authorized by NEC. Installing a third-party
Port 0
Port 1 Port 2
Port 3
Port 5 Port 4