Advanced Chipset Configuration Submenu - NEC N8100-1644F User Manual

Advanced Chipset Configuration submenu

When [Advanced Chipset Configuration] is selected in the Advanced menu and then the Enter key
is pressed, the screen below is displayed.
For details about the options, see the following table.
Option
HPET Disabled
[Enabled]
VT-d Disabled
[Enabled]
I/OAT Disabled
[Enabled]
QPI Frequency [Auto]
4,800 GT/s
5,866 GT/s
6,400 GT/s
Wake On Disabled
LAN/PME
[Enabled]
Wake On Ring [Disabled]
Enabled
Wake On RTC [Disabled]
Alarm
Enabled
IMPORTANT:
feature is enabled, this feature is disabled at the next system boot after
AC power-on. Press the power switch to start up the system. If the AC
power is turned off, the Wake On Ring feature on the power
management chip is disabled until the next DC power-on.
Parameters
Specify whether to enable or disable the multimedia timer.
Specify whether to enable or disable Intel
Technology for Directed I/O, which is provided by the Intel
chipset. This setting is only displayed for a processor that
supports this feature.
Specify whether to enable or disable the Intel I/O acceleration
technology feature.
Specify the QPI bus speed.
Specify whether to enable or disable the feature for remotely
turning the power on through a network.
Specify whether to enable or disable the feature for remotely
turning the power on through a serial port (modem).
Specify whether to enable or disable the feature for remotely
turning the power on by using the real-time clock alarm feature.
If the AC power is turned off while the Wake On Ring
Configuring Your Server 4-15
Description
®
Virtualization
[ ]: Factory-set