Problems With Express Setup - NEC N8100-1644F User Manual

8-44 Troubleshooting

Problems with Express Setup

Specified to join the Domain, but the system is installed as Workgroup:
→ When the setup fails to join the Domain during the installation, it will install the
system as Workgroup. Open [System] in Control Panel to specify joining the
Domain.
Unable to specify the details of Network adapter:
In Express Setup, you can not specify the details of Network adapter. Specify
→
them from Control Panel after starting Windows.
There is unused area on the lead of hard disk drive:
Did you install Windows Server 2003?
If you had installed Windows Server 2003 by Express Setup, the head 8MB of
→
hard disk drive may be unused area.
It is not a problem in operating the system.
Product key was not asked:
Case of Windows Server 2008
If you install using BackUp DVD-ROM, product key is not required.
→
If you install using the DVD-ROM other than BackUp DVD-ROM, product key
screen is displayed twice, at "during OS installation" and "before [MICROSOFT
SOFTWARE LICENSE TERMS] dialog, which displayed after OS installation".
Enter product key following the message.
Case of Windows Server 2003
If you install using BackUp CD-ROM, product key is not required.
→
If you install using the DVD-ROM other than BackUp DVD-ROM, product key
screen is displayed during OS installation.
Enter Product Key following the message.
When IIS is installed with Windows Server 2008 by Express Setup, following feature
is installed:
Windows Process Activation Service
– Process Model
– Configuration APIs
Remote Server Administration Tool
– Role Administration Tools
– Web Server (IIS) Tools
The feature listed above is activated because they are required for the installation
→
of IIS basic feature.