Table of Contents
Advertisement
8-52 Troubleshooting
MAINTENANCE TOOLS
The Maintenance Tools is a tool of this product prevention to maintain, and to analyze the trouble.
IMPORTANT: This guide contains procedures to use a floppy disk,
however, your server is not equipped with factory-installed floppy disk
drive and optical disk drive. Use the optional Flash FDD or USB FDD.
Starting Maintenance Tools
The Maintenance Tools is started according to the following procedure.
1.
Turn on peripheral devices and the server in this order.
2.
Insert the NEC EXPRESSBUILDER DVD-ROM supplied with your server into the
optical disk drive of your server.
3.
Press Ctrl, Alt, and Delete to reboot the server from the NEC EXPRESSBUILDER.
(You may also turn off and then on again to reboot the server.)
System boots up displaying Boot selection menu.
IMPORTANT:
"Os installation" starts by the automatic after the Boot selection menu is
displayed.
An initial selection of the menu is "Os installation".
Advertisement
Table of Contents
Troubleshooting
