Table of Contents
Advertisement
5-66 Installing the Operating System with Express Setup
INSTALLING Windows Server 2003
Express Setup proceeds the setup by selecting or inputting several parameters on the wizard. You
can also save the parameters to a floppy disk as a parameters file.
1.
Turn the power of peripheral device on, and then turn on the server.
2.
Insert the NEC EXPRESSBUILDER DVD-ROM into the optical disk drive of the server.
3.
Press the RESET switch or press Ctrl, Alt, and Delete to reboot from the NEC
EXPRESSBUILDER. (You may also turn off and then on again to reboot the server.)
The system will boot from the DVD-ROM and NEC EXPRESSBUILDER starts.
Select "Os installation *** default ***" from the Boot selection menu. (If you do not hit
any key, "Os installation" is selected automatically.)
The Top menu will appear.
4.
Select [English] from the [Select Language], click [OK].
Advertisement
Table of Contents
Troubleshooting
