Table of Contents
Advertisement
Windows Server 2008 R2 Clean Installation
This section explains how to perform a clean installation of Windows Server 2008 R2.
Follow steps below appropriate to your environment.
1.
Turn on your system.
IMPORTANT: To install Windows Server 2008 R2, you may need to
update BIOS.
To check if your system needs a BIOS update, go to:
http://www.nec.com/express/
2.
Insert the Windows Server 2008 R2 DVD-ROM into your DVD-ROM drive.
3.
Restart the system.
To restart the system, press Ctrl + Alt + Del or turn off the system once, and then turn it
on again.
IMPORTANT: When prompted to [press any key to boot from CD or
DVD], press Enter while the message is displayed.
If the Windows installation screen (shown in step 4) does not appear,
turn off the system, and then turn it on again.
The DVD-ROM starts. A message "Windows is loading files ..." appears.
Installing Windows Server 2008 R2 D-7
Advertisement
Table of Contents
Troubleshooting
