Remote Monitoring
• On the Cisco Unified IP Phone, press Applications, choose Network > IPv4, and then scroll to the IP
Step 2
Open a web browser and enter the following URL, where IP_address is the IP address of the Cisco Unified
IP Phone:
http://IP_address
Disable and Enable Web Page Access
For security purposes, you may choose to prevent access to the web pages for a phone. If you do so, you will
prevent access to the web pages that are described in this chapter and to the Cisco Unified CM User Options
web pages.
To disable or enable access to the web pages for a phone, follow these steps from Cisco Unified
Communications Manager Administration.
Procedure
Step 1
Choose Device > Phone.
Step 2
Specify the criteria to find the phone and click Find, or click Find to display a list of all phones.
Step 3
Click the device name to open the Phone Configuration window for the device.
Step 4
Scroll down to the Product Specific Configuration Layout section.
Step 5
To disable access, from the Web Access drop-down list, choose Disabled.
Step 6
To enable access, from the Web Access drop-down list, choose Enabled.
Step 7
Click Save.
Step 8
Click Apply Config.
Device Information Fields
The Device Information area on a phone web page displays device settings and related information for the
phone. The following table describes these items.
To display the Device Information area, access the web page for the phone as described in the
Web Page, on page
Table 13: Device Information Area Items
Item
MAC Address
Address option.
64, and then click the Device Information hyperlink.
Description
Media Access Control (MAC) address of the phone
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
Disable and Enable Web Page Access
Access Phone
65