Features, Templates, Services, And Users; Available Telephony Features - Cisco 3905 Administration Manual

Features, Templates, Services, and Users

After you install Cisco Unified IP Phones in your network, configure their network settings, and add them
to Cisco Unified Communications Manager, you must use the Cisco Unified Communications Manager
Administration application to configure telephony features, optionally modify phone templates, set up
services, and assign users.
This chapter provides an overview of these configuration and setup procedures. Cisco Unified Communications
Manager documentation provides detailed instructions for these procedures.
To list supported features for all phones or for a particular phone model on your Cisco Unified
Communications Manager, you can generate a Unified CM Phone Feature List report on Cisco Unified
Reporting.
For suggestions about how to provide users with information about features, and what information to provide,
see Internal Support Web Site, on page 97
For information about setting up phones in non-English environments, see
page 99
This chapter includes following topics:
•
•
•

Available telephony features

After you add Cisco Unified IP Phones to Cisco Unified Communications Manager, you can add functionality
to the phones. The following table includes a list of supported telephony features, many of which you can
configure using Cisco Unified Communications Manager Administration. The Reference column lists
Cisco Unified Communications Manager and other documentation that contains configuration procedures
and related information.
For information about using most of these features on the phone, see the Cisco Unified SIP Phone 3905 User
Guide for Cisco Unified Communications Manager.
Available telephony features, page 47
Add Users to Cisco Unified Communications Manager, page 53
User Options Web Pages, page 54
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
5
C H A P T E R
International User Support, on
47