Streaming Statistics - Cisco 3905 Administration Manual

Streaming Statistics

Item
Local Address
Start Time
Stream Status
Host Name
Sender Packets
Sender Octets
Sender Codec
Sender Reports Sent
Sender Report Time
SentStreaming Statistics,
on page 75
Rcvr Lost Packets
Avg Jitter
Rcvr Codec
Rcvr Reports
SentStreaming Statistics,
on page 75
Rcvr Report Time
SentStreaming Statistics,
on page 75
Rcvr Packets
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
76
Description
IP address and UDP port of the phone.
Internal time stamp indicating when Cisco Unified Communications Manager
requested that the phone start transmitting packets.
Indication of whether streaming is active or not.
Unique, fixed name that is automatically assigned to the phone based on its
MAC address.
Total number of RTP data packets transmitted by the phone since starting this
connection. The value is 0 if the connection is set to receive only mode.
Total number of payload octets transmitted in RTP data packets by the phone
since starting this connection. The value is 0 if the connection is set to receive
only mode.
Type of audio encoding used for the transmitted stream.
1
Number of times the RTCP Sender Report have been sent.
Internal time stamp indication when the last RTCP Sender Report was sent.
Total number of RTP data packets that have been lost since starting receiving
data on this connection. Defined as the number of expected packets less the
number of packets actually received, where the number of received packets
includes any that are late or duplicate. The value displays as 0 if the connection
was set to send-only mode.
Estimate of mean deviation of the RTP data packet inter-arrival time, measured
in milliseconds. The value displays as 0 if the connection was set to send-only
mode.
Type of audio encoding used for the received stream.
Number of times the RTCP Receiver Reports have been sent.
Internal time stamp indication when a RTCP Receiver Report was sent.
Total number of RTP data packets received by the phone since starting receiving
data on this connection. Includes packets received from different sources if this
is a multicast call. The value displays as 0 if the connection was set to send-only
mode.
Remote Monitoring