Cisco 3905 Administration Manual page 52

Network Setup Menu
Table 6: Network Setup Menu Options
Option
IPv4
MAC Address
Host Name
Domain Name
Operational VLAN ID
Admin. VLAN ID
PC VLAN
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
38
Description
In the IPv4 Setup submenu, you can do the
following:
• Enable or disable the phone to use the IP
address that is assign by the DHCP server.
• Manually set the IP Address, Subnet Mask,
Default Routers, DNS Server, and Alternate
TFTP servers.
For more information on the IPv4 address fields,
refer to IPv4 Setup Menu Options.
Unique Media Access Control (MAC) address of
the phone
Unique host name that the DHCP server assigned
to the phone.
Name of the Domain Name System (DNS) domain
in which the phone resides.
Auxiliary Virtual Local Area Network (VLAN)
configured on a Cisco Catalyst switch in which
the phone is a member.
If the phone has not received an auxiliary VLAN,
this option indicates the Administrative VLAN.
If neither the auxiliary VLAN nor the
Administrative VLAN are configured, this option
defaults to a VLAN ID of 4095.
Auxiliary VLAN in which the phone is a member.
Used only if the phone does not receive an
auxiliary VLAN from the switch; otherwise it is
ignored.
Allows the phone to interoperate with 3rd party
switches that do not support a voice VLAN. The
Admin VLAN ID option must be set before you
can change this option.
Cisco Unified IP Phone Settings
To Change
Scroll to IPv4 Setup and press
Select.
Display only - Cannot configure.
Display only - Cannot configure.
See Set Domain Name Field,
on page 40.
Display only - Cannot configure.
The phone obtains its
Operational VLAN ID via Cisco
Discovery Protocol (CDP) from
the switch to which the phone is
attached. To assign a VLAN ID
manually, use the Admin VLAN
ID option.
See Set Admin VLAN ID Field,
on page 40.
See Set PC VLAN Field, on
page 40.