Perform Final End User Configuration Steps - Cisco 3905 Administration Manual

Perform Final End User Configuration Steps

Note
g) Click Save.
h) Click Associate End Users at the bottom of the window to associate a user to the line being configured.
Use Find in conjunction with the Search fields to locate the user, then check the box next to the user's
name, then click Add Selected. The user's name and user ID should now appear in the Users Associated
With Line pane of the Directory Number Configuration window.
i) Click Save. The user is now associated with Line 1 on the phone.
j) If your phone has a second line, configure Line 2.
k) Associate the user with the device:
l) Proceed to
Perform Final End User Configuration Steps
If you are not already on the End User Configuration page, choose User Management > End User to perform
some final configuration tasks. Use the Search fields and Find to locate the user (for example, John Doe),
then click on the user ID to get to the End User Configuration window for the user.
In the End User configuration window, do the following:
Procedure
Step 1 In the Directory Number Associations pane of the screen, set the primary extension from the drop-down list.
Step 2
In the Mobility Information pane, check the Enable Mobility box.
Step 3 In the Permissions Information pane, use the User Group buttons to add this user to any user groups. For
example, you may want to add the user to a group that has been defined as a Standard CCM End User Group.
To view all configured user groups, choose User Management > User Group.
Step 4 Click Save.
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
110
This setting applies only to the current device unless you check the check box at right (Update
Shared Device Settings) and click Propagate Selected. The check box at right displays only if
other devices share this directory number.
• Choose User Management > End User.
• Use the search boxes and Find to locate the user you have added (for example, doe for the last name).
• Click on the user ID (that is, johndoe). The End User Configuration window appears.
• Click Device Associations.
• Use the Search fields and Find to locate the device with which you want to associate to the user.
Select the device, then click Save Selected/Changes. The user is now associated with the device.
• Click Go next to the Back to User Related link in the upper-right corner of the screen.
Perform Final End User Configuration Steps, on page
Basic Phone Administration Steps
110.