Cisco 7941G User Manual page 42

Call Answer
If you want to...
Answer with a headset
Answer with the
speakerphone
Switch from a connected
call to answer a new call
Answer using call waiting
Send a call to a voice
message system
Auto-connect calls
Retrieve a parked call on
another phone
Use your phone to answer a
call ringing elsewhere
Answer a priority call
(SCCP phones only)
Answer a call on your
mobile phone or other
remote destination
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
26
Then...
Press , if unlit. Or, if is lit, press
Answer or (flashing).
Note The ringing line is selected
automatically. Contact your
system administrator for the
options to select the primary line
each time.
If you are using a wireless headset, refer
to the wireless headset documentation.
Press , Answer, or (flashing).
The ringing line is selected
Note
automatically. Contact your
system administrator for the
options to select the primary line
each time.
Press Answer, or if the call is ringing on
a different line, press (flashing).
Press Answer.
Press iDivert.
Use AutoAnswer.
Use Call Park, Directed Call Park, or
Assisted Directed Call Park.
Use Call Pickup.
Hang up the current call and press
Answer.
Set up Mobile Connect and answer your
phone.
When you enable Mobile Connect, answer
the call on your mobile phone, and have
up to four IP Phones or Softphone
configured as shared lines, the additional
phones stop flashing.
Calling Features
For more information, see...
Handset, Headset, and
Speakerphone, on page 61
Handset, Headset, and
Speakerphone, on page 61
Hold and Resume, on page 27
Hold and Resume, on page 27
Call Transfer To Voice Message
System, on page 33
AutoAnswer with Headset or
Speakerphone, on page 63
Call Park, on page 45
Call Pickup, on page 43
Priority Calls, on page 53
See Business Calls Using Single
Phone Number, on page 56 .