Headset; Control Wired Headset Sidetone - Cisco 7941G User Manual

Headset

Headset
Your phone supports four- or six-wire headset jacks for wired headsets. Cisco Unified IP Phones 7962G and
7942G also support wireless headsets. For information about purchasing headsets, see
Headsets, on page
You can use a headset with all of the controls on your phone, including
However, if you use a wireless headset, refer to the wireless headset documentation for instructions.
If you want to...
Toggle headset mode on and off
Switch to a handset
Adjust the volume level for a call
If you use AutoAnswer, see
Your system administrator can set up your phone to record a conversation between you (on your headset), a
supervisor (on the phone handset), and your connected party.

Control Wired Headset Sidetone

When you speak on a telephone using a headset, the sound picked up by the headset microphone can be sent
back through the headset speaker. This creates a low-level feedback, known as sidetone. The wired headsets
can result in sidetone . Different wired headsets require different sidetone and settings. You need to select the
best sidetone level for the wired headset you use.
Procedure
Step 1
Press
Step 2 Use the Preferences menu and navigate to Headset Sidetone.
Step 3
Select Headset Sidetone.
Step 4 Select one of the sidetone levels:
• High
• Normal
• Low
• Very Low
• Off
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
62
16.
Then...
Press
Lift the handset.
Press
Press Save to preserve the volume level for future calls.
AutoAnswer with Headset or Speakerphone, on page
.
.
during a call or after invoking a dial tone.
Handset, Headset, and Speakerphone
Wired and Wireless
and .
63.