Create Conference By Calling Participants; Add New Participants To Conference; Join Conference - Cisco 7941G User Manual

Calling Features

Create Conference by Calling Participants

Procedure
Step 1
From a connected call, press Confrn or Conference. You may need to press the more softkey to see Confrn.
Step 2 Enter the phone number of the participant.
Step 3 Wait for the call to connect.
Step 4 Press Confrn or Conference again to add the participant to your call.
Step 5
Repeat to add additional participants.

Add New Participants to Conference

Your system administrator determines whether noninitiators of a conference can add or remove participants.
Procedure
Step 1 From a connected call, press Confrn or Conference. You may need to press the more softkey to see Confrn.
Step 2 Enter the phone number of the participant.
Step 3 Wait for the call to connect.
Step 4 Press Confrn or Conference again to add the participant to your call.
Step 5 Repeat to add additional participants.

Join Conference

Join allows you to combine two or more existing calls to create a conference in which you are a participant.
Tips
• If you frequently join more than two parties into a single conference, you may find it useful to first select
• When Join completes, the caller ID changes to Conference.
• You may be able to combine multiple conference calls by using the Join or DirTrfr softkeys. Contact
• A Call Chaperone user can conference only the first caller. Subsequent callers can be conferenced by
the calls that you want to join together, and then press Join to complete the action.
your system administrator to see if this feature is available to you.
the other participants in the conference.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
Join Conference
37