Phone Screen Features - Cisco 7941G User Manual

Phone Features
Icon

Phone Screen Features

The following figure shows how your main phone screen may look with an active call.
1
2
3
4
5
6
7
Line or Call State
Idle Intercom line
One-way intercom call
Two-way intercom call
Primary phone line Displays the phone number (directory number) for your primary phone
line. When several feature tabs are open, the phone number and the
time and date display alternately in this area.
Programmable buttons Serve as phone line buttons, intercom line buttons, speed-dial buttons,
phone service buttons or phone feature buttons. Icons and labels indicate
how these buttons are configured.
Softkey labels Displays a softkey function for the corresponding softkey button
Status line Displays audio mode icons, status information, and prompts.
Call activity area Displays current calls per line, including caller ID, call duration, and
call state for the highlighted line (standard view). See
Definitions, on page
Phone tab Indicates call activity.
Feature tabs Indicate an open feature menu. See
page
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Description
The intercom line is not in use. See
Note The intercom line is sending or receiving one-way audio.
See Intercom Calls, on page
You press the intercom line to activate two-way audio with the
intercom caller. See Intercom Calls, on page
5, and Multiple Calls, on page
8.
Communications Manager 9.0 (SCCP and SIP)
Phone Screen Features
Intercom Calls, on page 40
40.
40.
Line and Call
29.
Feature Buttons and Menus, on
.
7