Remote Control - Dimplex BLF50 Owner's Manual

Operation
waiting five (5) minutes before
switching the unit back on.
CAUTION: If you need to
continuously reset the heater,
disconnect power and call
Dimplex customer service at
1-888-DIMPLEX
(1-888-346-7539).

Remote Control

The fireplace is supplied with a
radio frequency remote control.
This remote control has a range
of approximately 50 feet (15.25 m),
it does not have to be pointed at
the fireplace and can pass
through most obstacles (including
walls). It is supplied with one
of hundreds of independent
frequencies to prevent
interference with other units.
!
NOTE: Before attempting
any operation with the remote,
pull the plastic insulator strip
out from between the remote
casing and battery cover
(Figure 19).
Figure 19
On
button
Off button
Plastic
strip
Battery
cover
Remote Control Initialization
If the hand held transmitter or
receiver board has been replaced,
follow these steps to initialize the
transmitter and receiver:
Ensure that power is supplied
through the main service panel.
Turn Main On/Off Switch to
On (Figure 18A).
Move the Three Position
Switch to the " REMOTE "
position (Figure 18B).
Press and hold the Manual
Control Button marked
five (5) seconds. After five (5)
seconds, there is a 10 second
window to press any button on
the remote control.
" I " for
19