Dimplex BLF50 Owner's Manual page 20

Operation
Press any button on the
remote control transmitter within
that 10 seconds.
This will synchronize the remote
control transmitter and receiver.
Remote Control Usage
The remote control operates the
fireplace levels sequentially (from
off): flames only; to flames and
low heat; to flames and high heat.
The level is increased every time
the ON button is pressed on the
remote control transmitter and the
fireplace can be turned off at any
point by pressing the OFF button.
Battery Replacement
To replace the battery:
Slide battery cover open on
the hand held transmitter
(Figure 19).
Install one (1) 12-Volt (A23)
battery in the battery holder.
Close the battery cover.
20 www.dimplex.com