Remote Control - Dimplex 3-STEP Optimyst Operating Instructions Manual

REMOTE CONTROL

Display Screen
1
'Menu' Button
2
'Back' Button
3
'Advance' Button(ADV)
4
'Up and Down' Arrows
5
6 'Enter' Button (Press to
Activate the Remote)
TO FIT THE BATTERIES
The remote control is supplied with 2xAA batteries in a bag. Lift off the battery cover on the back of the remote control
and insert the batteries taking note of the polarity.
Batteries must be recycled or disposed of properly.
Check with your Local Authority or Retailer for recycling advice in your area .
Frequency band(s) this product operates in: 2.4GHz
Maximum radio-frequency power transmitter in the frequency band(s) this product operates in: 2.71dBm
PAIRING THE REMOTE CONTROL
The remote control has already been paired to your product during factory assembly. In the unlikely event that the
remote control disconnects from the product, or you obtain a spare remote control, you will need to complete the pairing
process:
1.
Open the drawer and press the rocker switch to the on (I) position. You should hear an audible beep.
2.
Press and hold 'Button 6' until PAIR appears on the display
3.
Bring the remote control close to the product where the receiver is. See (Fig 11)
4.
The product will start to beep and blink
5.
Press 'Button 6' to complete the pairing process. The product will go into standby mode.
CREATING YOUR PERFECT OPTIMYST EFFECT
With Optimyst technology you can create a flame effect that is unique to you. First ensure the appliance is on by pressing
the main switch to I (Fig 10). To turn on the flames press the
the ENTER button to activate and use the
FLAME COLOUR: There are 6 colour themes to chose from. To adjust the flame colour, navigate to colour icon
the remote and press enter. Use
manual controls press the
TIP: Orange is the go to colour for a traditional authentic look, but when it is time for a celebration switch to the Prism
theme that cycles through a rainbow of colours. In summer time blue is both cooling and calm, whilst green always
draws attention at Holloween.
FLAME INTENSITY: You can adjust the flame intensity by selecting
to choose from, press
manual controls press the
time to react to the changes you make.
TIP: Lower levels give a gentle slow flame, higher levels a faster fuller flame.
FLAME BRIGHTNESS: During spring and summer when the days or longer you may need to increase the brightness
of the flame to make it more vivid. Select the brightness icon
or
or to toggle between options 1 to 6 flame themes and ENTER to select. On the
repeatedly to cycle through the colours.
or to adjust intensity, F1 being the lowest setting and F6 being the highest setting. On the
and buttons to adjust the flame to your desired level. Please give the flame generator
1
2
3
6
button on the manual controls. If using the remote, press
buttons to navigate to the
and press ENTER to adjust. There are 6 levels
on the romote and press enter. Use
7
4
5
icon and press ENTER to select.
on
or to adjust