Operation - Dimplex BLF50 Owner's Manual

Operation

The manual controls for the
electric fireplace are located on
the right side of the unit and inside
the air intake slot (Figure 18).
Figure 18
C
A. Main On/Off Switch
The Main On/Off Switch supplies
power to all fireplace functions.
When the switch is in the " I "
position, the unit is on. When in
the " O " position, the fireplace is
off.
B. Three Position Switch
The Three Position Switch
changes the mode the fireplace
operates in and has three (3)
positions: " MANUAL "; " OFF ";
and " REMOTE ".
18
B A
When in " REMOTE " mode,
the fireplace's three levels of
operation are controlled by the
ON and OFF buttons of the
remote control transmitter.
In " OFF " mode, power to all
functions is cut off.
In " MANUAL " mode, the
fireplace's three levels of
operation are controlled by the
Manual Control Buttons.
C. Manual Control Buttons
The Manual Control Buttons
operate the fireplace levels
sequentially (from off): flames
only; to flames and low heat; to
flames and high heat.
The level is increased every time
the " I " button is pressed, and the
fireplace can be turned off at any
point by pressing the " O " button.
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
fireplace off and it will not come
back on without being reset. It
can be reset by switching the
Main On/Off Switch to Off and
www.dimplex.com