Error Handling And Command List; Error Handling - Teledyne DALSA HS-40-04k40-xx-R User Manual

Piranha HS-xx RoHS User Manual
Error Handling and
Command List

Error Handling

The follow ing table lists w arning and error m essages and provid es a d escription and
possible cau se. Warning m essages are retu rned w hen the cam era cannot m eet the fu ll
valu e of the requ est; error m essages are retu rned w hen the cam era is u nable to com plete
the requ est.
Table 22: Warning and Error Messages
Warning Messages
Camera Response
OK>
Warning 01: Outsid e of specification>
Warning 02: Clipped to m in>
Warning 03: Clipped to m ax>
Warning 04: Related param eters
ad justed >
Warning 07: Coefficient m ay be
inaccurate A/ D clipping has occurred >
Warning 08: Greater than 1% of
coefficients have been clipped
Warning 09: Internal line rate
inconsistent w ith read out tim e>
Teledyne DALSA
Appendix A
Comment
Cam era executed com m and
Param eter accepted w as outsid e of specified
operating range (e.g. gain greater than ±10 d B of
factory setting, or SSF below specification).
Param eter w as clipped to the current operating
range. Use GCP or GET to see value used .
Param eter w as clipped to the current operating
range. Use GCP or GET to see value used .
Internal operating cond ition is ad justed to
accom m od ate the entered com m and . E.g.
requesting exposure tim e longer than line tim e
autom atically ad justs the line tim e to m eet the
exposure tim e requirem ent.
In the region of interest (ROI) greater than 6.251%
single or 1% of averaged pixel values w ere zero or
saturated .
Greater than 1% of FPN or PRN U coefficients have
been calculated to be greater than the m axim um
allow able and so w ere clipped .
Changing this param eter (e.g. vertical binning) has
changed read out tim e and that is greater than the
internal SYN C
85
03-032-20013-03