Setting The Camera Throughput; Setting The Pixel Readout Direction - Teledyne DALSA HS-40-04k40-xx-R User Manual

Piranha HS-xx RoHS User Manual

4.4.3 Setting the Camera Throughput

Purpose:
Syntax:
Syntax Elem ents:
N otes:
Related Com m and s
Exam ple:

4.4.4 Setting the Pixel Readout Direction

Purpose:
Syntax:
Syntax Elem ents:
N otes:
Teledyne DALSA
Works in conjunction w ith the
d eterm ines the throughput of the cam era. Refer to the tables in
section 4.4.1 H ow to Configure Cam era Output to d eterm ine w hich
configurations are valid for your cam era m od el and how this
com m and relates to other cam era configuration com m and s.
sot m
m
Output throughput. Allow able values ar e:
80 =
4 taps at 20MH z or 2 taps at 40MH z
160 = 2 taps at 80MH z or 4 taps at 40MH z
320 = 4 taps at 80MH z or 8 taps at 40MH z
640 = 8 taps at 80MH z
Throu ghpu t is calcu lated as:
Throughput= (N umber of Camera Link Taps) x (Camera Link
Pixel Rate in MHz)

To obtain the throughput setting, use the com m and
clm.

Throughput values are clipped if the cam era is unable to
m aintain the current throughput setting and a w arning
m essage is d isplayed .

Refer to the tables in section 4.4.1 H ow to Configure Cam era
Output to d eterm ine w hich configurations are valid for your
cam era m od el.
clm
sot 160
Sets the tap read out from left to right or from right to left. This
com m and is useful if the cam era m ust be m ounted upsid e d ow n.
smm i
i
Read out d irection. Allow able values are:
0 = All pixels are read out from left to right.
1 = All pixels are read out from right to left.

To obtain the current read out d irection, use the com m and
get smm.
or

This com m and is available in both TDI and Area Mod e.

Refer to the follow ing figures and tables for an explanation of
pixel read out and m irror d irection.

Refer to section 1.3 Im age Sensor for sensor architecture
d iagram s that illustrate sensor read out d irection.
clm
com m and (see previous) and
49
gcp get
or
gcp
03-032-20013-03