Setting A Pretrigger; Data Processing; Setting A Region Of Interest - Teledyne DALSA HS-40-04k40-xx-R User Manual

Piranha HS-xx RoHS User Manual
Table 16: HS-80-04k40 Forward or Reverse Pixel Readout
Readout Direction
Left to Right
Softw are com m and
smm 0
Right to Left
Softw are com m and
smm 1
Table 17: HS-80-08k40, HS-80-08k80 Forward or Reverse Pixel Readout
Readout Direction
Left to Right
Softw are com m and
smm 0
Right to Left
Softw are com m and
smm 1

4.4.5 Setting a Pretrigger

Purpose:
Syntax:
Syntax Elem ents:

4.5 Data Processing

4.5.1 Setting a Region of Interest

Purpose:
Syntax:
Syntax Elem ents:
Teledyne DALSA
Tap 1 Tap 2 Tap 3
1-512 513-1024 1025-1536
4096-3585 3584-3073 3072-2561
Tap 1 Tap 2 Tap 3
1-1024 1025-2048 2049-3072
8192-7169 7168-6145 6144-5121
A pretrigger m ay be required for som e fram e grabbers.
spt i
i
Sets the pixel range used to collect the end -of-line statistics and
sets the region of pixels used in the ccg, cao, cpa, gl, gla, ccf,
and
In m ost applications, the field of view exceed s the required object
size and these extraneous areas should be ignored . It is
recom m end ed that you set the region of interest a few pixels
insid e the actual useable im age.
roi x1 y1 x2 y2
x1
y1
x2
Tap 4 Tap 5
1537-2048 2049-2560
2560-2049 2048-1537
Tap 4 Tap 5
3073-4096 4097-5120
5120-4097 4096-3073
Pretrigger in a range from 0 to 16.
ccp
com m and s.
Colum n start num ber. Must be less than or equal to the
colum n end num ber in a range from 1 to (colum n resolution –
1).
Row start num ber. Must be less than or equal to the row end
num ber in a range from 1 to (row end num ber – 1) except in
TDI Mod e w here y1 m ust be 1.
Colum n end num ber. Must be greater than or equal to the
Tap 6 Tap 7 Tap 8
2561-3072 3073-3584 3585-
4096
1536-1025 1024-513 512-1
Tap 6 Tap 7 Tap 8
5121-6144 6145-7168 7169-
8192
3072-2049 2048-1025 1024-1
03-032-20013-03
51