Setting The Camera Link Mode - Teledyne DALSA HS-40-04k40-xx-R User Manual

48

4.4.2 Setting the Camera Link Mode

Purpose:
Syntax:
Syntax Elem ents:
N otes:
Related Com m and s
Exam ple:
03-032-20013-03
Sets the cam era's Cam era Link con figuration, num ber of Cam era
Link taps and d ata bit d epth. Refer to the tables on the previous
pages to d eterm ine w hich configurations are valid for your cam era
m od el and how this com m and relates to other cam era configuration
com m and s.
clm m
m
Output m od e to use:
2: Base configuration, 2 taps, 8 bit output
3: Base configuration, 2 taps, 12 bit output
15: Med ium configuration, 4 taps, 8 bit output
16: Med ium configuration, 4 taps, 12 bit output
21: Full configuration, 8 taps, 8 bit ou tput

When you change the Cam era Link m od e
cam era attem pts to m aintain the current
(pixels/ sec). If the current throughput is too slow or too fast for
the current Cam era Link m od e, the cam era w ill autom atically
ad just the throughput value and w ill return a w arning m essage
that a related param eter w as ad justed .

To obtain the current Cam era Link m od e, use the com m and
gcp get clm.
or

The bit patterns are d efined by the Teled yne DALSA Cam era
Link Road m ap available at
sot
clm 15
Piranha HS-xx RoHS User Manual
(clm com m and ), the
sot
throughput
Teled yne DALSA application notes.
Teledyne DALSA