Returning Camera Settings With Get Commands - Teledyne DALSA HS-40-04k40-xx-R User Manual

80
GCP Screen
Analog Offset:
Digital Offset:
Background Subtract:
System Gain:

Returning Camera Settings with Get Commands

You can also retu rn ind ivid u al cam era settings by inserting a ―
com m and that you w ant to qu ery. If the com m and has a tap or pixel nu m ber param eter,
you m u st also insert the tap nu m ber or pixel nu m ber that you w ant to qu ery. Refer to
Table 21 below for a list of available com m an d s. To view a help screen listing the
follow ing get com m and s, u se the com m and
Table 21: Get Commands
Syntax
get cao
get ccf
get ccp
get clm
get css
get dpc
03-032-20013-03
80
80
0
4096
4096
Parameters Description
t
Returns the analog offset for the tap ind icated
t = tap selection, either 1 to number of CCD taps, or
0 for all taps
x1 x2
Returns the FPN pixel coefficients for the pixel range
ind icated .
x1 = Pixel start num ber
x2= Pixel end num ber
x1 x2
Returns the PRN U pixel coefficients for the pixel range
ind icated .
x1 = Pixel start num ber
x2= Pixel end num ber
Returns the current Cam era Link m od e.
Returns the num ber of line sam ples averaged for pixel
coefficient calculations or for output of
X1 X2
Returns the pixel coefficients in the ord er FPN , PRN U,
FPN , PRN U, ...
x1 = Pixel start num ber
x2= Pixel end num ber
in a range from 1 to sensor pixel count.
Piranha HS-xx RoHS User Manual
Description
80 80 80
Analog offset settings set
w ith the sao com m and .
See section Analog Signal
Processing for d etails.
80 80 80
Digital offset settings set
w ith the sdo com m and .
See section Digital Signal
Processing for d etails.
0 0 0
Background subtract
settings set w ith the ssb
com m and . See section
Digital Signal Processing
for d etails.
4096 4096
Digital gain settings set
w ith the ssg com m and .
See section Digital Signal
Processing for d etails.
get"
gh
.
in front of the
gla
com m and .
Teledyne DALSA