Table of Contents
Advertisement
5
Remove the black light-shield paper from the OPC belt by
pulling the tab on the front.
6
Firmly slide the cartridge the rest of the way into the printer
until it snaps into place. It is in place when you can see the
green arrows inside the metal frame of the printer.
7
Turn the green end-handle on the cartridge down to close it
and lock the cartridge in place.
8
Clear the REPLACE BELT status message through the control
panel using the Administration/Engine/Clear Warning menu.
See chapter 1, "Printer Configuration," in the reference
guide for details on using the control panel.
Light-Shield
Advertisement
Table of Contents
