QMS Magicolor CX User Manual page 53

Hide thumbs Also See for Magicolor CX:
Table of Contents

Advertisement

Print 3-hole or other pre-punched media the same way labels are
printed. Make sure you place the media printing-side up with the top
edge feeding into the printer first.
Envelopes can be printed from the manual-feed tray or from the
optional envelope cassette. If you purchased the optional envelope
cassette for your printer, see chapter 2, "Printer Options," of the refer-
ence guide for information on installing and using it.
To print envelopes from the manual-feed tray, see "Using the Manual
Feed Tray" on page 20. Envelopes are loaded with the printing side
up, so that the top of the envelope (the flap side) is on the left as the
envelope is pulled into the printer.
To print on heavy paper stocks (between 24 and 43 lb [90 g/m2 and
163 g/m2]
1
Set up the manual-feed tray for printing thick stock:
a
Press the Online/Offline key to take the printer off line. (The
Online/Offline LED goes out and IDLE appears in the
message window.)
b
Press the Menu key to enter the Configuration menu. Then
press the Next key until the following message displays:
CONFIGURATION
OPERATOR CONTROL

Advertisement

Table of Contents
loading

Table of Contents