Table of Contents
Advertisement
4
Remove any jammed media you see.
5
Check to be sure no other pieces of media are lodged farther
back in the slot. Then, if you removed the manual-feed plat-
form, replace it.
Push it back into the printer until it is secure.
6
Make sure the media in the cassette is in good condition, lies
flat, and does not exceed the upper-limit mark on the cas-
sette.
7
Slide the cassette back into the printer until it's secure.
8
Open and close the top cover to clear the jam message in the
control panel window.
When the control panel message window displays IDLE, the printer is
ready to print.
Advertisement
Table of Contents
