Table of Contents
Advertisement
1
See "Refilling the Media Cassette" on page 16 or "Using the
Manual Feed Tray" on page 20 for information on loading
media.
2
If you haven't previously, set up the tray you want to use for
transparency printing:
a
At the printer control panel, press the Online/Offline key.
b
Press the Tray Select key until the LED for tray you want to
use for transparencies is lit on the control panel.
c
Press the Media key until the Transparency LED is lit on the
control panel.
d
Press the Online/Offline key.
3
Use your application's print setup feature to select Transpar-
ency printing, and select any other printing options you
want.
If you're printing from a Windows or a Macintosh application, you
can select transparency printing from your application if you use
the QMS Level 2 Windows Driver or Macintosh driver.
Note: Any time you select a media type from the driver, the tray
»
you're printing to must already have been set from the control
panel for the desired media type.
4
Send your job.
Advertisement
Table of Contents
